SDI to Analog Video Converter

The module provides to convert the serial digital video input SDI 270Mbit/sec to analog Composite PAL/NTSC together with Component analog RGB/YUV according to BT470 standards.
After equalization and re-clocking serial digital video input, by using 10 bit D/A resolution and 16xfs Over-sample converter, identifies 50Hz or 60Hz system to regain the analog component YUV/RGB together with analog Composite PAL/NTSC signal. In case of no digital input the module generates a black bar signal in output port.
Analog component format RGB or YUV selection is performed via on-board Switches. The VBI data existed in the digital Luminance will be inserting in the composite signal. The output levels are adjusted via front panel rotary encoder.

BNC for digital input with active loop-through outputs and analog outputs are

located on rear panel.
 

Features                                                                                                                                      more information

• Serial Digital Video Input Equalization with Active loop-through

• 16xfs Over-sampling Processing D/A with 10 bit Resolution D/A Converter

• 4 Analog Composite/ Selectable Component RGB/YUV Outputs

• Vertical Blanking Interval Data regaining in the composite outputs

• Adjustable Composite & Component Outputs level

• Black-bar/Color-bar Analog Outputs Generation

• Installable in 3RU Digital Studio Subrack